제품명 : KSLGP, Sanitary Twin Screw Pump
제품특징
KSLGP pumps provide you with a range of convincing advantages that together result in the highest possible cost and production efficiency. Using a modular system, we offers four pump sizes and different screw sets shat cover a conveyance range of 401/h to 150 m3/h with a unit size up to 40 mm diameter. The different screw sizes make it possible to handle a wide range of flow capacities with the same viscosities, operating pressures and rotation speeds, KSLGP pumps feature no metal-ta-metal contact between the pump screws and the housing. This enables the conveyance of non-lubricating or corrosive and contained materials. As the pump rotates, the intermeshing of the two screw along with the pump housing room chambers. These chambers fill with the pumped fluid and move it from the suction side of the pump to the higher pressure discharge side of the pump. The pump is designed to allow for reverse flow by simply changing the shaft direction. The pump come with a rotation speed of up to 3,600 rpm.
• Designed for reverse flow capabilities.
• Shaft seal feeding makes the seal at the atmospheric pressure, keep the pump's seal ability at the high pressure.
• High self suction ability Self-priming down to a vacuum of less than 0-8 bar when the pump is filled.
• Big rang of medium transferred: Viscosity from 1 ~ 500,000cst, the maximum size of 40mm.
• Large range of speeds, from below 100 up to 3,600rpm, make it possible to convey with one pump and also use it as a conveying aggregate.
• Low-pulsation conveyance
제품사양
Model | KSLGP Pump |
---|---|
Capacity | 40 L/h - 150 m3/h |
Pressure difference | 16 Bar |
Maximum speed | 3,600 rpm |
Viscosity | Max. 500,000 cst |
Rotation | reversible operation |
Product Temperature | Max. 130°c |
Cleaning Temperature | up to 140°c |
Shaft seal | single. daube. rubber shaft seal, gland packing |